Wholesale China Bakelite Phenolic Resin Factories – Phenolic resin for foundry materials – Zetian

Short Description:

Product Detail

Product Tags

Feedback (2)

We've been convinced that with joint efforts, the enterprise between us will bring us mutual benefits. We could guarantee you item excellent and aggressive price tag for Friction Material For Brake Pads For Phenolic Resin , Melamine Phenolic Resin , Phenolic Resin Granular For Coated Sand , While using the improvement of society and economy, our corporation will retain a tenet of "Focus on trust, high quality the first", moreover, we count on to make a glorious long run with each and every customer.

Wholesale China Bakelite Phenolic Resin Factories – Phenolic resin for foundry materials – Zetian Detail:

Phenolic resin for foundry

This series is thermoplastic phenolic resin with yellow flakes or grannulars, characterized in as follows:

1. The resin has high strength and the amount of addition is small, which can reduce the cost.

2. Low gas generation, reduce casting porosity defects and improve yield.

3. The resin has good flowability, easy filming, and filling without any dead angle.

4. Low free phenol, reduce environmental pollution and improve the working environment of workers.

5. Fastening speed, improve core shooting efficiency and reduce working hours.

PF8120 series technical data

Grade	Appearance	Softening point(℃) (International standard)	Free phenol (%)	Cure /150℃（s）	Application/ Characteristic
8121	Yellow flake / granular	90-100	≤1.5	45-65	High intensity, core
8122		80-90	≤3.5	25-45	Cast aluminium /core, high intensity
8123		80-90	≤3.5	25-35	Quick curing, shell or core
8124		85-100	≤4.0	25-35	High intensity, core
8125		85-95	≤2.0	55-65	High intensity
8125-1		85-95	≤3.0	50-70	Common

Packing and storage

Package: flake/granular: 25kg/40 kg per bag, Packed in woven bag, or in Kraft paper bag with plastic liner inside. Resin should be stored in a cool, dry and well ventilated place far away from heat

Application

Phenolic resin special for foundry coated sand, mainly used for solid core and shell in the production of coated sand. It has the characteristics of high strength and low free phenol content

Instructions

3.1 Sand selection. When using, first select the particle size of the raw sand according to the requirements.

3.2 Fried sand. After selecting the particle size, weigh a certain weight of raw sand for frying.

3.3 Add phenolic resin. After the temperature reaches 130-150℃, add phenolic resin.

3.4 Gauto water solution. The amount of Utopia added is 12-20% of the resin addition.

3.5 Add calcium stearate.

3.6 Perform sand removal, crushing, screening, cooling, and storage.

4. Matters needing attention:

The resin must be stored in a ventilated and dry place. Avoid direct sunlight and keep away from heat sources. The storage temperature should not exceed 35°C. Do not stack the resin bag too high during storage. Tie the mouth immediately after use to avoid agglomeration.

Product detail pictures:

Related Product Guide:

Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" as well as the theory of "quality the basic, believe in the 1st and management the advanced" for Wholesale China Bakelite Phenolic Resin Factories – Phenolic resin for foundry materials – Zetian , The product will supply to all over the world, such as: Jamaica, Belarus, Palestine, If you need to have any of our merchandise, or have other items to be produced, make sure you send us your inquiries, samples or in depth drawings. Meanwhile, aiming to develop into an international enterprise group, we look forward to receiving offers for joint ventures and other cooperative projects.

Aramith Phenolic Resin Balls