Wholesale China Carbon Phenolic Resin Manufacturers Suppliers – Phenolic resin for foundry materials – Zetian

Short Description:

Product Detail

Product Tags

Feedback (2)

With our outstanding administration, powerful technical capability and strict top quality handle procedure, we go on to provide our purchasers with reliable good quality, reasonable selling prices and excellent services. We goal at becoming certainly one of your most responsible partners and earning your gratification for Powder Phenolic Resin , Good Factory Phenolic Resin , Density Of Phenol Formaldehyde Resin , Make sure you come to feel absolutely cost-free to speak to us for organization. nd we think we're going to share the ideal trading practical experience with all our retailers.

Wholesale China Carbon Phenolic Resin Manufacturers Suppliers – Phenolic resin for foundry materials – Zetian Detail:

Phenolic resin for foundry

This series is thermoplastic phenolic resin with yellow flakes or grannulars, characterized in as follows:

1. The resin has high strength and the amount of addition is small, which can reduce the cost.

2. Low gas generation, reduce casting porosity defects and improve yield.

3. The resin has good flowability, easy filming, and filling without any dead angle.

4. Low free phenol, reduce environmental pollution and improve the working environment of workers.

5. Fastening speed, improve core shooting efficiency and reduce working hours.

PF8120 series technical data

Grade	Appearance	Softening point(℃) (International standard)	Free phenol (%)	Cure /150℃（s）	Application/ Characteristic
8121	Yellow flake / granular	90-100	≤1.5	45-65	High intensity, core
8122		80-90	≤3.5	25-45	Cast aluminium /core, high intensity
8123		80-90	≤3.5	25-35	Quick curing, shell or core
8124		85-100	≤4.0	25-35	High intensity, core
8125		85-95	≤2.0	55-65	High intensity
8125-1		85-95	≤3.0	50-70	Common

Packing and storage

Package: flake/granular: 25kg/40 kg per bag, Packed in woven bag, or in Kraft paper bag with plastic liner inside. Resin should be stored in a cool, dry and well ventilated place far away from heat

Application

Phenolic resin special for foundry coated sand, mainly used for solid core and shell in the production of coated sand. It has the characteristics of high strength and low free phenol content

Instructions

3.1 Sand selection. When using, first select the particle size of the raw sand according to the requirements.

3.2 Fried sand. After selecting the particle size, weigh a certain weight of raw sand for frying.

3.3 Add phenolic resin. After the temperature reaches 130-150℃, add phenolic resin.

3.4 Gauto water solution. The amount of Utopia added is 12-20% of the resin addition.

3.5 Add calcium stearate.

3.6 Perform sand removal, crushing, screening, cooling, and storage.

4. Matters needing attention:

The resin must be stored in a ventilated and dry place. Avoid direct sunlight and keep away from heat sources. The storage temperature should not exceed 35°C. Do not stack the resin bag too high during storage. Tie the mouth immediately after use to avoid agglomeration.

Product detail pictures:

Related Product Guide:

We can easily normally satisfy our respected buyers with our excellent high-quality, excellent selling price and good service due to we've been far more expert and more hard-working and do it in cost-effective way for Wholesale China Carbon Phenolic Resin Manufacturers Suppliers – Phenolic resin for foundry materials – Zetian , The product will supply to all over the world, such as: Armenia, Nigeria, United States, Our factory is equipped with complete facility in 10000 square meters, which makes us be able to satisfy the producing and sales for most auto part solutions. Our advantage is full category, high quality and competitive price! Based on that, our products win a high admiration both at home and abroad.

Lignin Phenol Formaldehyde Resin