Wholesale China Foundry Phenolic Resin Manufacturers Suppliers – Phenolic resin for foundry materials – Zetian
Wholesale China Foundry Phenolic Resin Manufacturers Suppliers – Phenolic resin for foundry materials – Zetian Detail:
Phenolic resin for foundry
This series is thermoplastic phenolic resin with yellow flakes or grannulars, characterized in as follows:
1. The resin has high strength and the amount of addition is small, which can reduce the cost.
2. Low gas generation, reduce casting porosity defects and improve yield.
3. The resin has good flowability, easy filming, and filling without any dead angle.
4. Low free phenol, reduce environmental pollution and improve the working environment of workers.
5. Fastening speed, improve core shooting efficiency and reduce working hours.
PF8120 series technical data
Grade |
Appearance |
Softening point(℃) (International standard) |
Free phenol (%) |
Cure /150℃(s) |
Application/ Characteristic |
8121 |
Yellow flake / granular |
90-100 |
≤1.5 |
45-65 |
High intensity, core |
8122 |
80-90 |
≤3.5 |
25-45 |
Cast aluminium /core, high intensity |
|
8123 |
80-90 |
≤3.5 |
25-35 |
Quick curing, shell or core |
|
8124 |
85-100 |
≤4.0 |
25-35 |
High intensity, core |
|
8125 |
85-95 |
≤2.0 |
55-65 |
High intensity |
|
8125-1 |
85-95 |
≤3.0 |
50-70 |
Common |
Packing and storage
Package: flake/granular: 25kg/40 kg per bag, Packed in woven bag, or in Kraft paper bag with plastic liner inside. Resin should be stored in a cool, dry and well ventilated place far away from heat
Application
Phenolic resin special for foundry coated sand, mainly used for solid core and shell in the production of coated sand. It has the characteristics of high strength and low free phenol content
Instructions
3.1 Sand selection. When using, first select the particle size of the raw sand according to the requirements.
3.2 Fried sand. After selecting the particle size, weigh a certain weight of raw sand for frying.
3.3 Add phenolic resin. After the temperature reaches 130-150℃, add phenolic resin.
3.4 Gauto water solution. The amount of Utopia added is 12-20% of the resin addition.
3.5 Add calcium stearate.
3.6 Perform sand removal, crushing, screening, cooling, and storage.
4. Matters needing attention:
The resin must be stored in a ventilated and dry place. Avoid direct sunlight and keep away from heat sources. The storage temperature should not exceed 35°C. Do not stack the resin bag too high during storage. Tie the mouth immediately after use to avoid agglomeration.
Product detail pictures:
Related Product Guide:
We can constantly satisfy our respected customers with our good high quality, good price tag and good support due to we have been additional specialist and extra hard-working and do it in cost-effective way for Wholesale China Foundry Phenolic Resin Manufacturers Suppliers – Phenolic resin for foundry materials – Zetian , The product will supply to all over the world, such as: Bahrain, Lesotho, Argentina, We solution have passed through the national skilled certification and been well received in our key industry. Our specialist engineering team will often be ready to serve you for consultation and feedback. We are able to also provide you with no cost samples to meet your needs. Best efforts will be produced to offer you the very best service and solutions. For anyone who is considering our business and solutions, please speak to us by sending us emails or get in touch with us right away. As a way to know our products and enterprise. lot more, you'll be able to come to our factory to find out it. We will constantly welcome guests from around the globe to our firm. o build enterprise. elations with us. Please really feel absolutely free to make contact with us for small business and we believe we will share the top trading practical experience with all our merchants.
By Claire from Malaysia - 2018.06.18 19:26
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
By Betsy from Bangalore - 2017.02.14 13:19