Wholesale China Properties Of Phenolic Resins Factory – Phenolic resin for foundry materials – Zetian
Wholesale China Properties Of Phenolic Resins Factory – Phenolic resin for foundry materials – Zetian Detail:
Phenolic resin for foundry
This series is thermoplastic phenolic resin with yellow flakes or grannulars, characterized in as follows:
1. The resin has high strength and the amount of addition is small, which can reduce the cost.
2. Low gas generation, reduce casting porosity defects and improve yield.
3. The resin has good flowability, easy filming, and filling without any dead angle.
4. Low free phenol, reduce environmental pollution and improve the working environment of workers.
5. Fastening speed, improve core shooting efficiency and reduce working hours.
PF8120 series technical data
Grade |
Appearance |
Softening point(℃) (International standard) |
Free phenol (%) |
Cure /150℃(s) |
Application/ Characteristic |
8121 |
Yellow flake / granular |
90-100 |
≤1.5 |
45-65 |
High intensity, core |
8122 |
80-90 |
≤3.5 |
25-45 |
Cast aluminium /core, high intensity |
|
8123 |
80-90 |
≤3.5 |
25-35 |
Quick curing, shell or core |
|
8124 |
85-100 |
≤4.0 |
25-35 |
High intensity, core |
|
8125 |
85-95 |
≤2.0 |
55-65 |
High intensity |
|
8125-1 |
85-95 |
≤3.0 |
50-70 |
Common |
Packing and storage
Package: flake/granular: 25kg/40 kg per bag, Packed in woven bag, or in Kraft paper bag with plastic liner inside. Resin should be stored in a cool, dry and well ventilated place far away from heat
Application
Phenolic resin special for foundry coated sand, mainly used for solid core and shell in the production of coated sand. It has the characteristics of high strength and low free phenol content
Instructions
3.1 Sand selection. When using, first select the particle size of the raw sand according to the requirements.
3.2 Fried sand. After selecting the particle size, weigh a certain weight of raw sand for frying.
3.3 Add phenolic resin. After the temperature reaches 130-150℃, add phenolic resin.
3.4 Gauto water solution. The amount of Utopia added is 12-20% of the resin addition.
3.5 Add calcium stearate.
3.6 Perform sand removal, crushing, screening, cooling, and storage.
4. Matters needing attention:
The resin must be stored in a ventilated and dry place. Avoid direct sunlight and keep away from heat sources. The storage temperature should not exceed 35°C. Do not stack the resin bag too high during storage. Tie the mouth immediately after use to avoid agglomeration.
Product detail pictures:
Related Product Guide:
"Control the quality by the details, show the power by quality". Our enterprise has strived to establish a remarkably efficient and stable team team and explored an effective excellent control system for Wholesale China Properties Of Phenolic Resins Factory – Phenolic resin for foundry materials – Zetian , The product will supply to all over the world, such as: Georgia, Mecca, Greece, For many years, we now have adhered to the principle of customer oriented, quality based, excellence pursuing, mutual benefit sharing. We hope, with great sincerity and good will, to have the honor to help with your further market.
By Adela from Cyprus - 2017.06.16 18:23
In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!
By Elaine from Bangladesh - 2018.12.22 12:52